UNIQUE Point of Entry Firestop System
UNIQUE’s Point of Entry Firestop Cable Sleeves System (POE) is designed for firestopping and weatherproofing cable feeds from satellites, cameras, pole lines or any other outside-fed communications cables. The can be used as a point of entry either through an outside wall or through a rooftop penetration.
POE cable sleeves are available in 1″, 2″, and 4″ diameters. Most point-of-entry penetrations will require a sleeve at least 24 inches long so we stock all three sizes in 24“ lengths. We also can manufacture and ship custom lengths with a 24 hour lead time. Components are manufactured of Electrical Metallic Tubing (EMT) and powder coated red in our USA factory.
When installing the Point of Entry Firestop System on a rooftop, you will also need to order the optional Roof Mount Rubber Boot, which is staggered to seal and weather proof all 3 diameter sizes of the Point of Entry cable sleeves.
For special sizes, call Customer Service at 251.960.5018. Take our Free Training and Certification Test to become one of our Certified Installers and receive special discounted pricing on our products.
POE Sleeve System Contents:
1- 24” EMT Sleeve
2- round washers
2- sliding compression couplings
1- Plenum rated plastic bushing
1- UNIQUE Firestop Putty stick
1- weather head
OPTIONAL Silicone Rubber Boot Features:
Silicone material for hot pipes, chimney pipes, chemical pipes, extreme environments and service.
Flexible Base Design
Sealing tightly with sealant and almost any type of fastener, the flexible base is virtually compatible with any roofing material — metal, plastic, asphalt, tile, rubber membrane, and more.
Uniform Plumbing Code (UPC) Listed
Master Flash was used to create a new engineering standard for profiled roofing by the International Association of Plumbing and Mechanical Officials (for the Uniform Plumbing Code).
Master Flash performance is unaffected by:
- Hail stones
Master Flash provides a permanent seal that controls gaseous or liquid environments to eliminate leakage and odor contamination.
Master Flash base is made of heavy-duty aluminum alloy for flexibility and corrosion resistance.
The stepped-cone design makes Master Flash easily adaptable to most roof pitches.
Share on Socials!
Sign up to receive our industry publications for FREE!
ST800: 800amp Service Tester
1. Test Integrity of Secondary Service
2. Identify Secondary Cables
3. Identify Feed In and Feed Out at Padmount
4. Identify Energized and De-Energized Cables