HI-Z® High Voltage AC Voltmeters

Ross Engineering voltmeter1

Models VM25E & VM50E with a large analog display 250V, 5kV, 10kV, 25kV, 50kV & 100kV RMS AC Ranges

Ross Engineering Corporation’s Hi-Z® High Voltage Voltmeters are excellent for accurate capacitance voltage tap test point measuring, phasing, energized line indication, as well as direct HV line voltage measurement. The VM25 model measures very low current high source impedance voltages in three or more ranges to 25kV. The VM50 and VM100 model measures up to 50kV and 100kV respectively, in four or more ranges. HV input is high impedance, 85 megohms to over 1,000 megohms as required. The meters are partially shielded against stray electrical fields and have a 125kV, 150kV or 300kV basic impulse test level. All the models utilize a large digital or analog meter scale for accurate voltage measurement. Basic accuracy is ±.5% digital and ±3% analog.

 

 

Ross Engineering voltmeter2

Digital Model VM25D, VM50D or VM100D 200V, 2kV, 20kV, 25kV, 50kV or 100kV RMS AC Ranges

For capacitance tap voltage test points on cable connectors and for direct HV lines in the range of 10 volts up to 100kV RMS, 50/60Hz. Optionally incorporated for higher accuracy in Ross Engineering Corporation’s proven Hi-Z® Voltmeter.

These meters are widely used for voltage sensing, accurate measurement and phasing. They can be used with capacitance tap voltage test points on cable elbows and other voltage test point terminals as well as on overhead lines. They are rated for 125kV, 150kV or 300kV PK basic impulse test level.

 

Detailed Information

Portable Test Set

Voltage Sensing

Hi-Z® Capacitance

Specifications are for reference only and are subject to change.
Contact Ross Engineering Corp. for current information.

Ross Engineering Corporation
540 Westchester Drive, Campbell, CA 95008
Ph: 408-377-4621
info@rossengineeringcorp.com
www.rossengineeringcorp.com

Share on Socials!

Related Articles

Related Articles

Dabmar Lighting introduces a Stainless Steel Pagoda Fixture in LED

Dabmar Lighting is continuing their tradition of innovation by introducing a completely Stainless Steel Pagoda Fixture in LED. This fixture was created because of demand for ...
Read More

New SimGuide Service from CM Labs Simplifies Integration for Simulator Adopters

CM Labs Simulations, developer of Vortex® training simulators, today announced a new advisory service for organisations looking to capitalise on their use of simulation-based technology. CM Labs’ ...
Read More

JLG® ES SERIES SCISSOR LIFTS HAVE 200% MORE BATTERY LIFE*

Experience longer runtime and reduced charging time with our ES Series scissors. They feature an efficient electric direct drive, unmatched duty cycles and up to 1,000 ...
Read More